 |
||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
HOW TO CLEAN YOUR FILTER
Important note; When you have finished this operation, wait 10 minutes and look underneath your spa to make sure everything was tightened correctly and there are no leaks. If there are leaks, follow directions below:
As you finish cleaning the filter, you will note a small amount of water dripping down. This is from the spray you allowed to release from the pressure valve. After 10 minutes, though, if there is still water dripping, turn off your system and loosen and remove the black locking ring. Also, remove the filter lid. Lubricate the black O-Ring. Replace the filter lid, pressing down firmly. Replace black locking ring and tighten, making sure not to cross-thread. Restart and check again after 10 minutes.
 |
|
| Quicktime Video w/Sound | Animation |
